CMM Programmer – Machinist (245720) Level 1,2 CMM Programmer / HAAS, OKK Mazak, Hermie, Citizen, Hardinge, Fadal / PC-DIMS, Metrology, GD&T / St. Louis area
- CMM Programmer: 10+ years of experience.
- PC-DMIS: 10+ years of experience.
- Metrology: 15 years of experience.
- Performed 3D inspection and documented results to support the Quality Management System: 10+ years of experience.
- Prior experience doing mechanical inspection and operating CMM in a shop environment. Experience with all size parts. 10+ years of experience.
- Catia viewer: 3 years of experience.
- Familiarity with tooling and fixture builder experience: 10+ years of experience.
- Strong mechanical aptitude, math skills, and ability to read drawings with GD&T: 25+ years of experience.
- Effective communication skills and the ability to work well with others.
- Programming and operating Brown & Sharpe CMM’s utilizing PC-DMIS software.
- Prepare and complete or provide data for FAI reports, in process inspections, and final inspections.
- Verify customer, supplier, and in-house certifications, specifications, and documentations for traceability information, part number, revisions, processing, material, and design criteria.
- Collaborate with production to create a CMM program priority list.
- Created work instructions for operation of a proven CMM program and for proving out an unproven CMM program.
- Program, set-up, and operate CNC Mills & CNC Lathes
- Lead with suggestions for work holding, speeds and feeds, and other lean manufacturing principles.
- Analyze manufacturing engineering. Place detailed instructions on the travelers, and work instructions for manufacturing guidance.
- Setting-up and operating of Swiss style turning centers (Citizen).
- Manufacturing of complex precision parts using a variety of CNC machines (Haas, OKK, Mazak, Hermle).
- Planning of part inspection and programming of four Brown & Sharpe CMM’s.
- Lead and facilitated the GD&T training program.
- Programming, setting up, and operating of CNC mills and CNC lathes (Okuma, Hardinge)
- Programming CMM Equipment
- Stylus/Stylus System (Probe) Replacement
- Cleaning Ways, etc.
- Fixture Design And Setup
- ERP Work Order System
- Naming Convention
- File Network Allocation
- Gauge R&Rs
- Reading Blueprints
- Work Instructions
- Performing 3D inspection and Documenting Results
- Metrology
- GD&T
- Provide technical support
- Catia V5
- SolidWorks Models
- Using Calipers
- Using Micrometers
- Using Bore Gages, Pin Gages
- Standard Work
- CMM Cycle Time Reduction
- 5S
- CNC Machined Parts
- Die Cast Parts
- Molded Parts
- Assembly Operations
- Reviewing CMM Programs Prior to Release
- Analyze Drawings, Part Specifications, Tolerances
- Maintain the calibration of CMM and other measuring equipment
- Import Models (Catia, etc.) into PC-DMIS Software
- Perform Dimensional Inspection Layouts
- identify Causes Of Rejects
- Corrective Action
- Provide Time Estimates for Part Inspection
- Identify Any Fixture Requirements for Part Inspection
- Working with Machined Parts
- Working with Cast Parts
- PC-DIMS Software
- 3D Bridge Style CMM
- Gantry CMM
- Cantilever CMM
- Hexagon CMM
Education
- Level 1 CMM Programmer Certification
- Level 2 CMM Programmer Certification
- North County Technical School, Machine Shop Certificate
- Rockhurst University – How to be a superior communicator certificate
- Hexagon – PC-DMIS Portable certificate
- Hexagon – Power Inspect 2011 certificate
- AAIM – Problem solving & Decision-making certificate
- Hexagon – PC-DMIS for CMM 101, 102, and 103 certificate
- Hexagon – PC-DMIS for CMM 201, 202, and 203 certificate
- Hexagon – GD&T for PC-DMIS certificate
- TATA Technologies – Fundamentals of GD&T ASME Y14.5-1994 certificate
- Dassault Systems and Inceptra, LLC – USA – Enovia DM1 certificate
- Verisurf University – Inspection for Verisurf certificate
- Master Cam – 2D Lathe, 2D Mill, and 3D Mill