I&C Design Engineer (135467) Masters Electrical Engineering / Refinery, Tank Farm, Rubber, Petrochemical, LNG, Compressor, Construction / Will Relo
Senior I&C Design Engineer with 20+ years of experience in the design, engineering, commissioning, and operation of instrumentation and controls across multiple industries that include Plastics Plants, Refineries, Styrene Plants, Petrochemical Plants, LNG Plants, Compressor Stations, and oil/gas production facilities. His vast experience includes completing I&C projects for new equipment facilities, plant expansions, and upgrades around the world. He has a Masters in Electrical Engineering and is skilled in multiple PLC and DCS platforms. He is currently working on contract roles but is interested in a permanent opportunity. He is willing to relocate for the right position. His impressive experience includes:
• Responsible for instrumentation and controls for fired heater, boiler, and waste heat recovery projects.
• Responsible for I/C design of LPDE/EVA plastic plants, and development of basic engineering packages for projects worldwide including specifications, instrument datasheets, equipment packages, P&IDs, etc..
• Responsible for I/C design of styrene plant upgrades including new steam generation and distribution facilities, boilers, and utility systems.
• Updated Control Narratives, Interlock narratives, Cause and Effect diagrams, loop and wiring diagrams, panel drawings, layout drawings, DCS & SIS design specifications, and electrical control drawings.
• Participated in PHA, HAZOP, and LOPA reviews. Performed Factory Acceptance Testing (FAT) of control panels for Residue Gas and Expander compressors, System 1 cabinets, and other mechanical packages.
• Responsible for instrumentation and controls for mechanical package equipment including rotating machinery and utility systems for the Wheatstone LNG EPC project in Australia.
• Responsible for update of Cause and Effect diagrams, Safety Interlock Sheets, Interlock and Shutdown Narratives, and Interlock Lists for the safety instrumented system on the Nigerian FEED LNG project. Also, HAZOP punch list items resolution and P&ID updates.
• Developed SPI Intools datasheets for in-line instruments and valves as well as requisition packages.
o Responsible for vendor selection and specification of field instrumentation and valving for revamping of Alkylation, Polymerization, and FCCU Units.
o Responsible for preparing the equipment list and specifications for Rubber Lab testing equipment as part of the FEED BED package.
o Prepared and back-checked instrument sizing calculations and specification sheets for process facilities.
• Responsible for instrument and control issues for major equipment packages such as gas turbine generators; high pressure 10,000 hp turbine-driven water injection pumps; MV motor-driven process pumps; air compressors; inert gas generation systems and utilities.
• Responsible for developing the scope of the Delta V control system and specification of Foundation Fieldbus field instrumentation.
• Responsible for the project interfaces with Main Instrument and Control Contractor (MICC) for the design of Process Control System (PCS) and Process Safety Systems (PSS and ESS).
• Responsible for control system upgrade of BP gas production platforms.
• Responsible for the development of conceptual studies and cost estimates for the SCADA and telecommunication systems.
• Performed bid evaluation, and issued purchase requisitions.
• LPDE/EVA Plastic Plants
• Refinery Operations
• Compressor Stations
• Styrene Plant Upgrades
• Tank Farm
• Petrochemical Production
• LNG Plants
• Construction Projects
• Control Panels
• Rotating Machinery and Utility Systems
• Safety Instrumented System
• Instrument Datasheets
• Instrument Sizing Calculations
• PHA and Safety Analysis Report
• Production Platform
• DCS
• Re-Instrumentation Projects
• Geothermal plant
• P&ID and HAZOP
• Data Acquisition System
• SCADA
• Field Instrumentation and Controls
• Control Panels
• Bid Evaluation
• Specifying and Requisitioning of Instrumentation and Controls.
• Emerson Delta V DCS
• Honeywell DCS
• Power Distribution
• Motor
• Allen Bradley PLCs
• Siemens PLCs
• Control Panels
• Process Control
• VFDs
• HMIs
• Metering Systems
• Field Instrumentation
• Surge and Speed Control Systems
• Vibration Monitoring System
• RFQ Packages For Field Instrumentation And Controls
• Pressure Safety Devices (Relief Valves, Rupture Disks, And Rupture Pins).
• Leak Detection
• P&IDs
• FEED
• Package Equipment
• Relief Valves
• PHA, HAZOP and LOPA Reviews
• Pre-Feed and FEED Work
• Instrument Sizing Calculations and Specification Sheets
• Field Design Verification
• Installation Supervision
• Supervising Junior Engineers
• Responsible for Instrument and Control Issues for Major Equipment Packages such as Gas Turbine Generators; High Pressure 10,000 hp Turbine Driven Water Injection Pumps; MV Motor Driven Process Pumps; Air Compressors; Inert Gas Generation Systems and Utilities.
• Package Equipment P&ID Reviews and HAZOP Studies
Education
• M.S. Electrical Engineering
Specific Technical Expertise/Specialist Courses
• AutoCAD 11, in-house classes, Paragon Engineering Services
• Digital Instrumentation, Control System and PLC classes, San Jacinto College,
• API 14C, 30CFR250, and InTools in-house training classes
• INTools Instrument Database in-house classes (total of 40 hours)
• Master Program in Telecommunications classes, University of Houston
• Yokogawa Centum CS3000 5-day class
• Yokogawa Prosafe RS safety system 5-day class
• Safety Systems Life-Cycle: standards, SIL determination, system design; 12-module, 36-hour in-house training course by KBR certified safety engineers-instructors