{"id":1886,"date":"2023-03-28T17:52:50","date_gmt":"2023-03-28T21:52:50","guid":{"rendered":"http:\/\/mriomega.com\/?p=1886"},"modified":"2025-09-05T01:40:44","modified_gmt":"2025-09-05T05:40:44","slug":"chemical-process-engineer-16196-refinery-chemicals-phosporic-acid-wastewater-consumer-chemicals-project-management-single-renting-will-relo","status":"publish","type":"post","link":"https:\/\/mriomega.com\/index.php\/engineering\/chemical-process-engineer-16196-refinery-chemicals-phosporic-acid-wastewater-consumer-chemicals-project-management-single-renting-will-relo\/","title":{"rendered":"Chemical Process Engineer (16196) Refinery, Chemicals, Phosporic Acid, Wastewater, Consumer Chemicals \/ Project Management \/ Single, Renting, Will Relo"},"content":{"rendered":"\n

Chemical Engineer with 20 years of experience in process engineering in chemical and refinery operations. He is skilled in the areas of process and project engineering for oil refining, feedstocks, phosphoric acid, water & wastewater treatment as well as other organic and inorganic processes. he has worked with a wide variety of chemical processing equipment and is even experienced with DCS Automation. He has a BS in Chemical Engineering from the University of South Florida and an AS in Chemical Engineering Technology. He is single and willing to relocate<\/strong><\/p>\n\n\n\n

\u2022 Lead, supervised, and facilitated process project groups.
\u2022 Sized and cost process equipment, raw materials & electrical equipment including tanks, filters, distillation columns, valves, electronic controllers, heat exchangers, boilers, pumps, compressors & hydrotreaters.
\u2022 Performed consulting duties in solving chemical plant-related processes and process controls engineering challenges.
\u2022 Lead & designed projects from a FCI range of thirty thousand to ten million dollars.
\u2022 Familiar with PI management database system for extracting data for analysis on DCS system
\u2022 Strong competence with PSM operations, environmental compliance opacity stack testing and man-lift equipment operations.
\u2022 Performed P&IDs markups for projects & solved technical issues relating to plant operations.
\u2022 Attained success in completing a technical writing manual for the chlorination department.
\u2022 Worked on shifts with process operators and maintenance technicians in production operations & DCS process controls when maintaining process equipment and doing plant turnaround.
\u2022 Performed relief valve engineering designs as it pertains to refinery processes
\u2022 Performed P&IDs markups and process line lists operations
\u2022 Performed process simulations using ASPEN HYSYS, FATHOM, and KORF
\u2022 Completed project duties involving sizing process pipelines, pressure drop calculations, and other process operations as directed by lead engineers
\u2022 Hydraulic modeling using Fathom piping software to size pumps, heat exchangers, and process pipelines for shampoo and conditioning processes at the P&G manufacturing plant.
\u2022 Performed process operations for reading and interpreting PFDs and P&IDs
\u2022 Solved important chemical processes related to silicone-based chemical products from a process control perspective.
\u2022 Performed process control duties with instrumentation technician pertaining to TT, VFDs, actuators, and Delta V – DCS system.
\u2022 Performed project engineering applications on cooling tower equipment pertaining to engineering designs, costing applications, sizing, and water & wastewater treatment.
\u2022 Performed mass & energy balances on heat exchangers to determine output production rate streams and heat duties
\u2022 Performed chemical engineering calculations based on chemical process equipment and output for efficient optimization and cost control using LP (linear programming) simulators such as HAVERLY and ASPEN
\u2022 Analyzed and designed refining unit processes using costing charts and design equations for sizing and costing.
\u2022 Provided material balance forecasting and assistance with cost forecasting
\u2022 Performed process engineering duties and submitted reports on the following to ensure the continuous process for the phosphoric acid plant was economically feasible for production
\u2022 Mass Integration *Equipment selection *Pumps and compressors selection
\u2022 Performed mass and energy balances calculations and data collection analyses pertaining to phosphoric acid processes, solvent extraction techniques, and heat exchangers and processing equipment
\u2022 Performed commissioning process engineering techniques on chemical processing equipment including evaporators, and distillation columns.
\u2022 Performed project engineering applications on cooling tower equipment pertaining to engineering designs, costing applications, sizing, and water & wastewater treatment.
\u2022 Performed chemical engineering calculations (mass & energy balances) from a process engineering-based operation.
\u2022 Performed chemical engineering calculations based on chemical process equipment and output for efficient optimization and cost control.
\u2022 Experienced in the documentation of safety operations when dealing with process units for MOC, PHA, PPM, and PSM.
\u2022 Hands-on experience in designing feedback control processes.<\/p>\n\n\n\n

\u2022 Refinery Operations
\u2022 Petrochemical Feedstocks
\u2022 Oil \/ Gas
\u2022 LPG
\u2022 Jet Fuel
\u2022 Heat Balance Calculations
\u2022 Heat Transfer Coefficients
\u2022 Energy Balances
\u2022 LP Modeling
\u2022 Design Of Experiments DOE
\u2022 Equipment Design
\u2022 Equipment Process Calculations
\u2022 Material Balance Calculations
\u2022 Metal Balance Calculations
\u2022 Pumping Head Calculations
\u2022 Mass Transfer Calculations
\u2022 Pareto Analysis
\u2022 Pipeline Sizing
\u2022 Process Simulations
\u2022 Root Cause Analysis
\u2022 API Standards
\u2022 Detail Refinery Flows
\u2022 Determining Economic Feasibility
\u2022 Developing Design Drawings
\u2022 Documenting Chemical Processes
\u2022 Drying Processes
\u2022 Equipment Specification
\u2022 Filtration
\u2022 Fluid Catalytic Cracking
\u2022 Hydraulic Design\/Calculations
\u2022 Hydraulics \/ Pumping
\u2022 Increasing Production Capacity
\u2022 Inorganic Chemical Process
\u2022 Maintenance Operations
\u2022 Pilot Plant Operations
\u2022 Piping systems
\u2022 Plant Turnarounds
\u2022 Preventative Maintenance
\u2022 Process Modification \/ Optimization
\u2022 Process Troubleshooting
\u2022 Wastewater Processing
\u2022 PLCs
\u2022 DCS
\u2022 Pumps<\/p>\n\n\n\n

EDUCATION:
*Bachelors of Science in Chemical Engineering \u2013 University of South Florida (\u201802 – \u201804) GPA: 3.55
*AS Diploma in Chemical Engineering Technology \u2013 University of Technology, Jamaica (\u201897 – \u201800)<\/p>\n","protected":false},"excerpt":{"rendered":"

Chemical Engineer with 20 years of experience in process engineering in chemical and refinery operations. He is skilled in the areas of process and project engineering for oil refining, feedstocks, phosphoric acid, water & wastewater treatment as well as other organic and inorganic processes. he has worked with a wide variety of chemical processing equipment…<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[307],"tags":[125,135,175,270,319,468,573,636],"class_list":["post-1886","post","type-post","status-publish","format-standard","hentry","category-engineering","tag-chemical-engineer","tag-project-management","tag-chemicals","tag-process-engineer","tag-refinery","tag-oil-gas","tag-water","tag-feedstock"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/mriomega.com\/index.php\/wp-json\/wp\/v2\/posts\/1886","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mriomega.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mriomega.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mriomega.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mriomega.com\/index.php\/wp-json\/wp\/v2\/comments?post=1886"}],"version-history":[{"count":1,"href":"https:\/\/mriomega.com\/index.php\/wp-json\/wp\/v2\/posts\/1886\/revisions"}],"predecessor-version":[{"id":1887,"href":"https:\/\/mriomega.com\/index.php\/wp-json\/wp\/v2\/posts\/1886\/revisions\/1887"}],"wp:attachment":[{"href":"https:\/\/mriomega.com\/index.php\/wp-json\/wp\/v2\/media?parent=1886"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mriomega.com\/index.php\/wp-json\/wp\/v2\/categories?post=1886"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mriomega.com\/index.php\/wp-json\/wp\/v2\/tags?post=1886"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}